Argy can move a dance floor of sweaty bodies with house music without resorting to the hands-in-the-air syncopated beats that often have wailing house divas behind them. Purpose When performing respective image printing adjustments, used to check the machine status apart from that of the scanner with a non-scanned output VTC-PG pattern. Terminals CN Voltage Remarks 3. If none, replace the feedshift The feedshift coil. Also check for continuity within the transformer PCB make poor contact. Purpose To set how the image density is altered by a change of one step in the manual density adjustment.
|Date Added:||28 July 2009|
|File Size:||62.40 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Purpose Used to check conditions of use, settings and transmission procedures of the fax.
U Setting auto clear time Description Sets the time to return to initial settings after copying is complete. Open the bypass tray, paper conveying unit and front cover and then remove the image formation unit see page Amount of slack at is on Purpose To check the paper jam status.
Scanning is performed under the selected conditions and the result is displayed. The developing unit consists of the developing roller where a magnetic brush is formed, the doctor blade and the developing spirals that agitate the developer.
U Setting transmission Description Makes settings regarding fax transmission. Remove the screw holding each of the fixing heater front and rear retainers and then the retainers. Check if the job eject pulley, job eject roller Grease the bushings and gears.
Completion of machine installation. Figure The new setting is stored. Left cover switch LCSW According to the type of the PBX connected, select the mode to connect an outside call. Procedure Start Enter maintenance mode.
Remove the two screws holding the rear cover of the lower drawer and then the cover. Purpose When performing respective image printing adjustments, used to check the machine status apart from that of the scanner with a non-scanned output VTC-PG pattern.
Collimates the diffused laser beam emitted from the laser diode to convert it into a cylindrical beam. Paper jams in the copy paper is caught duplex unit when the around duplex paper main switch is turned conveying switch 1 or 2.
Subscription telephone line Compatibility Open the bypass tray, paper conveying unit Connector and front cover, and then remove the toner cartridge and waste toner tank. Remove the tape holding the drawer. coptstar
Got copstar, continue to print. Remove the two tapes holding the paper conveying unit and bypass tray. Also used when reentering data after replacing the backup RAM or initializing the set data.
Copystar CS Copier (AX) Overview – CNET
0230 Page 1 There is a regular error Causes between the centers of 1. G Copy exposure adjustment keys Press the start key. Copy exposure indicator Description Setting range Amount of slack at the Photo and Text: The screen for selectiong a maintenance item No. U Displaying the toner sensor output Description Displays the toner sensor output value, and related data.
U Initial setting for the developer Description Automatically sets the toner sensor control voltage and toner feed start level for the installed developer. Argy can move a dance floor of sweaty bodies with house music without resorting to the hands-in-the-air syncopated beats that often have wailing house divas behind them.
Values set are displayed in the user simulation. If a paper jam occurs frequently in the eject section when the number of copies is counted at the time of paper ejection, copies are provided without copy counts. Detects the presence of paper on the job separator tray.